Icseq - Set Inside Call Sequence; Idial - Dial Intercom; Inclu - Dial Inclusion; Intru - Call Intrude - Avaya 2420 User Manual

Hide thumbs Also See for 2420:
Table of Contents

Advertisement

2420 User Guide

ICSeq - Set Inside Call Sequence

Sets the ringing pattern (sequence) used for internal calls. Not supported by the 2420.
This function requires the ringing pattern (0 to 9) to be entered when programmed. The number is shown
next to ICSeq. This function cannot be programmed through the phone by the user.
Pressing
ICSeq changes the extension's ringback ringing pattern.
[User | Digital Telephony | Advanced | Set | Set Inside Call Seq]
See also:
OCSeq - Set Outside Call Sequence
RBSeq - Set Ringback Sequence.

IDial - Dial Intercom

The same as IAuto - Automatic Intercom. This function cannot be programmed through the phone by the
user.
[User | Digital Telephony | Emulation | Dial Intercom]

Inclu - Dial Inclusion

Intrudes on a call in progress at the target extension. This function is currently not supported on the
2420.
This function requires entry of the target extension number when programmed. The
the target extension number. This function cannot be programmed through the phone by the user.
Pressing
Inclu intrudes on the call in progress. The intruding user and target extension can then talk
but cannot be heard by the other party. When the intruder hangs-up the original call parties are
reconnected.
Note: That the System Administrator must configure the intruding extension as being able to intrude.
Additionally none of the other extensions involved in the call can have "Cannot be intruded on" status.
[User | Digital Telephony | Advanced | Dial | Dial Inclusion]

Intru - Call Intrude

Intrudes on a call in progress at the target extension, creating a conference between the callers and the
intruding extension.
This function requires entry of the target extension number when programmed. The
the target extension number. This function cannot be programmed through the phone by the user.
Pressing
Intru intrudes on the call in progress.
Note: That the System Administrator must configure the intruding extension as being able to intrude.
Additionally none of the other extensions involved in the call can have "Cannot be intruded on" status.
[User | Digital Telephony | Advanced | Call | Call Intrude]
2420 User Guide
IP Office 3.0(DT)
40DHB0002USEG Issue 3d (16th March 2005)
Inclu key shows
Intru key shows
Page 46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents