Gp 1 Diagnostics Entry And Exit (B215 And B205) - Xerox B205 Service Manual

GP 1 Diagnostics Entry and Exit (B215 and B205)

Purpose
This procedure describes the following items:
• How to enter Diagnostics Mode.
• How to exit Diagnostics.
For detailed information on Diagnostics Mode menu items, refer to Diagnostic Information in
the Diagnostics section of this service manual.
Procedure - B215 Diagnostics Mode Entry
Diagnostics entry for the B215 Multifunctional Printer:
1. Press and hold the Home Button on the control panel for at least 5 seconds until the
Password screen appears, Figure 1.
Figure 1 Password screen
2. Touch the box next to Passcode to open the keypad,
Figure 2 Keypad screen
Initial Release
Xerox® B205/B215 Multifunction Printer Service Manual
Figure 2.
July 2019
6-15
3. Enter the numbers [1934] as the password, then touch [Log In],
Figure 3 Password displayed screen
4. The Diagnostic Entry screen appears,
The following options are available:
• Data Setup
• Machine Test
• Report
• Exit Diagnostics
Figure 4 Diagnostics entry screen
NOTE: For detailed information on Diagnostics Mode menu items, refer to
Information.
Figure 3.
Figure 4.
General Procedures / Information
Diagnostic
GP 1