Configuration; Configuration Table For Et 200M - Siemens SIMATIC ET 200M Manual

Getting Started
2.7

Configuration

1. Start the SIMATIC Manager and create a new project with a
DP master (e.g. CPU 315-2 DP). In addition to OB 1 also create OB 82 for the
project.
2. Add the IM 153-2 from the hardware catalog to the PROFIBUS.
3. Set PROFIBUS address 3 for IM 153-2.
4. Drag the individual modules out of the hardware catalog and drop them onto the
configuration table.
Figure 2-4

Configuration table for ET 200M

2-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Distributed I/O Device ET 200M
EWA-4NEB780600602-06