Siemens SIMATIC ET 200M Manual page 211

Compatibility Between the IM 153-x Modules
Upgrading
You can upgrade the IM 153-2 (order number 6ES7 153-2AA02-0XB0; version 06)
to version 07 for a charge.
You can upgrade the IM 153-2 FO (order number 6ES7 153-2AB01-0XB0, version
05) to version 06 for a charge.
For more information, get in touch with your Siemens partner.
Response to the Removal/Insertion Interrupt
Up to
153-2AA02, version 06
153-2AB01, version 05
The ET 200M is set up on active bus modules. The
removal/insertion interrupt is disabled at parameter
assignment.
The removal or insertion of a module results in
station failure.
Parameterizable FM in a Configuration with the IM 153-2
To use the FM 353/354/355 in a distributed configuration with full S7 functionality,
you can use the following CPUs and FMs only as of the specified order numbers
and versions.
You can only use the CPUs and FMs not listed in Table 9-3 (CPU 316-2 DP, for
example) as of the first version.
Table 9-3 Restrictions with DP Master CPUs and FMs for the IM 153-2
Module
CPU 315-2 DP
CPU 413-2 DP
CPU 414-2 DP
CPU 416-2 DP
FM353
FM354
FM 355C
FM 355S
9-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
As of
153-2AA02, version 07
153-2AB01, version 06
The ET 200M is set up on active bus modules. The
removal/insertion interrupt is disabled at parameter
assignment.
It is still, however, possible to remove and insert
modules. An interrupt is not reported, but the
events are displayed in the diagnosis.
As of Order Number
6ES7 315-2AF01-0AB0
6ES7 413-2XG01-0AB0
6ES7 414-2XG01-0AB0
6ES7 414-2XJ00-0AB0
6ES7 416-2XK00-0AB0
6ES7 416-2XL00-0AB0
6ES7 353-1AH01-0AE0
6ES7 354-1AH01-0AE0
6ES7 355-0VH10-0AE0
6ES7 353-1VH10-0AE0
With Version Operating System
Update Possible as
of Version
03
02
02
04
04
04
01
01
01
01
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
01
01
01
03
03
03
–
–
–
–