Siemens SIMATIC ET 200M Manual page 63

Configuration Options with the ET 200M
The identification data is assigned to the indices in the way shown in Table 3-3.
Table 3-3 Identification data
Identification data Access
Index 1
Manufacturer Read
(2 bytes)
Device designation Read
(20 bytes)
Device serial number Read
(16 bytes)
Hardware revision Read
(2 bytes)
Software revision Read
(4 bytes)
Statistical Read
revision No. (2 bytes)
Index 2
TAG Read/
write
(max. 32
characters)
Index 3
Installation date Read/
write
(max. 16
characters)
Index 4
Description Read/
write
(max. 54
characters)
3-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Default
2A hex (= 42 dec) The name of the manufacturer is
stored here.
(42 dec = Siemens AG)
6ES7 153-2Bx00-0XB0 Order number of the module
Depends on The serial number of the module is
version stored here. This allows clear and
unambiguous identification of the
module.
Provides information on the module
version. Is incremented if the version
and/or firmware of the module
changes.
Provides information on the firmware
version of the module. If the firmware
version is incremented, the module
version (hardware version) also
increases.
– Provides information on the
parameterized modifications on the
module. The statistical revision No. is
incremented after each modification.
– Location identifier of the module.
Here you enter a unique identifier for
the module.
– Contains the date on which the module
was installed. Enter the date here.
Format YYYY-MM-DD
– Free text which is stored in the module.
Here you can enter additional
information regarding the properties of
the module.
Description
Distributed I/O Device ET 200M
EWA-4NEB780600602-06