4.6.3 Port-Based Priority Mode
When Port-Based priority is applied, any packets received from a high priority port will be treated as a high priority packet.
Select the QoS mode to Port-Based Priority, the Port ID to queue mapping configuration page appears, as the
shows.
The page includes the following fields:
• Object
• QoS Mode
Weighted Round
Robin Ratio
Figure 4-44 QoS – Port-Based Priority Configuration screen
• Description
The draw menu allows customization of QoS mode for Traffic classifiers.
• 802.1p Tag Priority
• IP DSCP
• Port-Base Priority
Weighted Round Robin ratio setting of priority queue.
The frame service rate of High-Priority queue to Low-Priority queue options are
shown as below:
• Highest:Lowest=4:1
• Highest:Lowest=8:1
Table 4-16 Descriptions of the Port-Base Priority
-69 -
User's Manual
Figure 4-44