Table of Contents
Advertisement
User's Manual
4.3.7 Managed IP
The function allows setting 5 specific IP address to access the Industrial PoE Switch. As shown in
Figure 4-18.
Figure 4-18 Managed IP Screen
4.3.8 Fault Relay Alarm
This Function allows controlling the Power Failure. If the terminal block connector has connected the fault alarm contacts
(3 & 4). The setting just like below picture. For example: when one of the power failure then it will trigger the warning device
and sound the alarm. As shown in
Figure 4-19.
Figure 4-19 Fault Relay Alarm Screen
-41 -
Advertisement
Table of Contents
