Table of Contents
Advertisement
INSERTS
The INSERTS mode is used to insert
sheets as chapter dividers.
INSERTS
6
5
4
3
2
1
INSERTS
5
3
1
6
5
4
3
2
1
5
3
1
8
7
6
5
4
3
2
1
9
7
5
3
1
Downloaded from:
http://www.usersmanualguide.com/
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
5
3
1
INSERTS
10
9
9
7
6
4
3
1
INSERTS
9
7
5
3
1
INSERTS
I
I
Insert sheets can be fed from tray 2, tray 3, or the bypass tray, but
when the bypass tray is used for cover stock, insert sheets must
be fed from tray 2 or tray 3. If the same paper stock is to be used
for the cover stock and the insert sheets, the bypass tray may be
used for both.
Insert sheets must be the same size as the copy paper being used
for copying the document.
Up to 18 insert sheets can be inserted into each set of copies.
Insert sheets can be copied on, but only on the front side even in
the 1-sided to 2-sided and 2-sided to 2-sided copy modes. The
back side of the original for an insert sheet will not be copied.
Some examples of insert sheet placement
When 1-sided copies are to be made:
Insert sheets can be placed with or without printing on them.
See page 28 for inserts with printing.
See page 31 for inserts without printing.
When 2-sided copies are to be made:
Copying onto insert sheets in this mode is possible only on the
front side.
The chapters of the original must contain an even number of
pages (a 2-sided original sheet is two pages).
Make uneven chapters of 1-sided originals even by adding
blank original sheets as necessary.
Copies of the opposite sides of a 2-sided original cannot be
separated by an insert sheet.
See page 34 for insert placement with printing.
See page 37 for insert placement without printing.
27
Advertisement
Table of Contents
