Important Set-up Information
HONDA.
OUTBOARD MOTOR
BF2D
TILLER HANDLE INSTALLATION
All information in this publication is based on the latest product information available at the time of approval for print-
ing. The illustration may vary according to the type, however the handle parts installation sequence is the same.
The tiller handle is temporary installed in reverse direction of the proper installation direction in the packing case.
1. Remove the 8 x 40 mm flange bolt, and the tiller handle.
FLANGE BOLT. 8
x
40
mm
TILLER HANDLE
Page: 79 - Honda BF2D Outboard Motors Shop Manual -
http://www.ReadManuals.Com