Service Rules; Serial Number Location - Honda BF2D Series Manual

H:ON'D.A
BFSD
3. SERVICE RULES
1. Use genuine Honda or Honda-recommended parts and lubricants or their equivalents. Parts that do not meet
Honda's design specifications may damage the engine.
2. Use the special tools designed for the product.
3. Install new gaskets, O-rings, etc. when reassembling.
4. When torquing bolts or nuts, begin with larger-diameter or inner bolts first and tighten to the specified torque diag-
onally, unless a particular sequence is specified.
5. Clean parts in cleaning solvent upon disassembly. Lubricate any sliding surfaces before reassembly.
6. After reassembly, check all parts for proper installation and operation.
7. Many screws used in this machine are self-tapping. Be aware that cross-threading or overtightening these screws
will strip the threads and ruin the hole.
8. Use only metric tools when servicing this engine. Metric bolts, nuts and screws are not interchangeable with non-
metric fasteners. The use of incorrect tools and fasteners will damage the engine.
9. Be sure that the battery built in a tester is fully charged and check the meter before inspection using the tester.
10. Follow the instructions represented by these symbols when they are used.
+1:
Apply recommended grease.
[ s. TooL
I :
Use special tool.
~:APPIVOil.
Ox 0 (0): Indicates the diameter, length, and quantity of metric flange bolt used.
P.O-O : Indicates the reference page.
4. SERIAL NUMBER LOCATION
The engine serial number is stamped on the clutch housing and frame serial number is located on the stern bracket.
Refer to this when ordering parts or making technical inquiries.
ENGINE SERIAL NUMBER
FRAME SERIAL NUMBER
Page: 6 - Honda BF2D Outboard Motors Shop Manual - http://www.ReadManuals.Com
2-2.