Table of Contents
Advertisement
TCX1000 Programmable ROADM Quick Start Guide
About This Quick Start Guide
Step 1: Prepare Your Site for the TCX1000-RDM20
2
This Quick Start Guide contains information you need to install and set up the Juniper
Networks TCX1000-RDM20 Programmable ROADM. For complete installation
instructions, see the TCX1000 Programmable ROADM Hardware Guide at
https://www.juniper.net/documentation/
WARNING:
This Quick Start Guide contains a summary of safety warnings
in
"Safety Warnings Summary" on page
for the TCX1000-RDM20, including translations, see the TCX1000
Programmable ROADM Hardware Guide at
https://www.juniper.net/documentation/
The TCX1000-RDM20 is a standalone 20-port reconfigurable optical add/drop multiplexer
(ROADM) with removable AC or DC power supplies and cooling fans.
Before installing the TCX1000-RDM20, make sure your site meets all power,
environmental, and clearance requirements. See the site preparation guidelines in the
TCX1000 Programmable ROADM Hardware Guide.
NOTE:
The TCX1000-RDM20 ships with two fan modules and two power
supplies installed.
Ensure that you have the following parts and tools available to install, connect power
to, and configure the TCX1000-RDM20:
Eight self-tapping bolts to secure the chassis and mounting brackets to the rack
(provided).
Power cords with plugs appropriate for your geographical location (provided with the
AC model).
19-in. front and rear mounting brackets (attached to the chassis).
(Optional) 21-in. and 23-in. front and rear mounting brackets (provided).
Grounding lug, nut, and washers (provided).
Two ring lugs (Panduit PN14-8R-C) for DC power (provided).
One fiber management bracket (provided).
Optical supervisory channel (OSC) kit (included with the TCX1000-RDM20-AC and
the TCX1000-RDM20-DC):
Small form-factor pluggable (SFP)—100BASE-FX Ethernet, 1511 nm, 43 dB reach.
Two 3-dB LC fixed optical attenuators.
.
20. For a complete list of warnings
.
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
