Table of Contents
Advertisement
INSTRUCTIONS
OPERATION
DELIMING
To maintain the machine at its optimum performance level, lime and corrosion
deposits must be removed. The frequency for deliming will be based on
water conditions. A deliming solution is available from your chemical supplier. Read
and follow all instructions on the label.
To delime the machine:
If this machine is
equipped with the SPS
1. Turn the machine on by pressing the ON/OFF button.
and lime is
becoming a frequent
problem, the cartridge
needs to be replaced.
See the Plumbing
Options page to order a
replacement.
2. Press and hold the FILL button until water overflows into the wash strainer.
3. Add deliming solution per supplier's instructions.
4. Close door.
5. Flip NORMAL/DELIME switch to DELIME.
6. Run machine the period of time recommended by chemical supplier.
7. Wait five minutes, then inspect inside of the machine. If the machine is not
delimed, run again.
8. Flip NORMAL/DELIME switch to NORMAL.
9. Run two cycles to remove residual deliming solution.
14
Advertisement
Table of Contents
