Automatic Preset Tuning - Yamaha RX-V359 Owner's Manual

Automatic preset tuning

You can use the automatic preset tuning feature to store
FM stations with strong signals up to 40 (A1 to E8: 8
preset station numbers in each of the 5 preset station
groups) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
STANDBY
/ON
PRESET/TUNING FM/AM
A/B/C/D/E
SEARCH MODE XM CATEGORY
EDIT NEXT
l h
STRAIGHT PROGRAM
PHONES SPEAKERS
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
2
1
Press INPUT l / h repeatedly so that
"TUNER" is displayed in the front panel
display.
INPUT
2
Press FM/AM to select "FM" as the reception
band.
FM/AM
XM
(U.S.A. model)
VOLUME
l PRESET/TUNING/CH h MEMORY TUNING MODE
DISPLAY
SET MENU MAN'L/AUTO FM AUTO/MAN'L
l INPUT h
INPUT MODE
MULTI CH INPUT
1 3
3
Press and hold MEMORY for more than 3
seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.
MEMORY
MAN'L/AUTO FM
A1:FM 87.5 MHz
Flashes
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
y
You can select the preset station group and the preset station
number where the first received station will be stored by pressing
A/B/C/D/E on the front panel and then PRESET/TUNING/CH
l / h.
Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after searching for
all the available stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it as described in "Manual preset tuning" on page 38.
FM/AM TUNING
Flash
AUTO MEMORY
37