Yamaha RX-V359 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V359
  6. Owner's manual

Yamaha RX-V359 Owner's Manual

Av receiver with built-in 5-channel power amplifier
Hide thumbs Also See for RX-V359:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
CA
RX-V359
AV Receiver
Ampli-tuner audio-vidéo
OWNER'S MANUAL
MODE D'EMPLOI

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V359

Summary of Contents for Yamaha RX-V359

  • Page 1 RX-V359 AV Receiver Ampli-tuner audio-vidéo OWNER’S MANUAL MODE D’EMPLOI...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 Retain this Owner’s Manual in a safe place for future reference. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

  • Page 5: Table Of Contents

    INTRODUCTION FEATURES... 2 GETTING STARTED... 3 Supplied accessories ... 3 Installing batteries in the remote control ... 3 CONTROLS AND FUNCTIONS ... 4 Front panel ... 4 Remote control... 6 Front panel display ... 8 Rear panel ... 9 PREPARATION CONNECTIONS ...

  • Page 6: Features

    Front: 100 W + 100 W Center: 100 W Surround: 100 W + 100 W Decoders and DSP circuits Proprietary YAMAHA technology for the creation of multi-channel surround sound Dolby Digital decoder Dolby Pro Logic/Dolby Pro Logic II decoder DTS decoder...

  • Page 7: Getting Started

    Supplied accessories Check that you received all of the following parts. Remote control POWER POWER POWER STANDBY POWER MD/CD-R TUNER SLEEP DTV/CBL V-AUX MULTI CH IN AUDIO DISC SKIP CODE SET VOLUME – – – MUTE INPUT MUTE 2CH STEREO MUSIC ENTERTAIN MOVIE...

  • Page 8: Controls And Functions

    CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel Note The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, XM, CATEGORY, PRESET/TUNING/CH l / h, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source.
  • Page 9 A PHONES jack Outputs audio signals for private listening with headphones. Notes • When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or at the SPEAKERS terminals. • All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

  • Page 10: Remote Control

    CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 57. Note The XM Satellite Radio controlling functions in the following buttons (BAND, MEMORY, SRCH MODE, DISPLAY, cursor buttons u / d / j / i, numeric buttons and ENT.) are only applicable to the U.S.A.
  • Page 11 E MUTE Mutes the audio output. Press again to restore the audio output to the previous volume level. F STRAIGHT Turns the sound field programs off or on. When this unit is in the “STRAIGHT” mode, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing.

  • Page 12: Front Panel Display

    CONTROLS AND FUNCTIONS Front panel display Note The XM indicator is only applicable to the U.S.A. model and lights up only when “XM” is selected as the input source. For details, see “Basic XM Satellite Radio operations” on page 44. VIRTUAL SILENT CINEMA STANDARD DIGITAL...

  • Page 13: Rear Panel

    Rear panel AUDIO MULTI CH INPUT VIDEO FRONT DTV/ SURROUND DIGITAL CENTER INPUT WOOFER V-AUX COAXIAL OPTICAL DTV/CBL (PLAY) CD-R (REC) WOOFER MONITOR AUDIO OUTPUT 1 XM jack (U.S.A. model only) See page 41 for connection information. 2 MULTI CH INPUT jacks See page 16 for connection information.

  • Page 14: Connections

    1.8 m (6 ft) above the floor. Subwoofer (SW) The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels,...

  • Page 15: Connecting Speakers

    Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

  • Page 16: Speaker Layout

    Connect a center speaker (3) to these terminals. SURROUND terminals Connect surround speakers (4, 5) to these terminals. SUBWOOFER OUTPUT jack Connect a subwoofer with built-in amplifier (6) (such as the YAMAHA Active Servo Processing Subwoofer System) to this jack. Left COMPONENT VIDEO TUNER...

  • Page 17: Information On Jacks And Cable Plugs

    Information on jacks and cable plugs Audio jacks and cable plugs AUDIO DIGITAL AUDIO COAXIAL (White) (Red) (Orange) Left and right Coaxial analog audio digital audio cable plugs cable plug Audio jacks This unit has three types of audio jacks (analog audio, digital audio coaxial, and digital audio optical).

  • Page 18: Connecting Video Components

    CONNECTIONS Connecting video components Connecting a video monitor Connect the video input jack of your video monitor to the MONITOR OUT jack. Connecting a DVD player/cable TV/ satellite tuner Connect the coaxial digital audio signal output jack of your DVD player to the DIGITAL INPUT DVD COAXIAL jack and connect the video signal output jack of the component to the DVD VIDEO jack of this unit.
  • Page 19 AUDIO MULTI CH INPUT VIDEO FRONT DTV/ SURROUND DIGITAL CENTER INPUT WOOFER V-AUX COAXIAL OPTICAL DTV/CBL (PLAY) CD-R (REC) WOOFER MONITOR AUDIO OUTPUT Audio out Audio in DVD recorder or AUDIO MULTI CH INPUT VIDEO FRONT DTV/ SURROUND DIGITAL CENTER INPUT WOOFER V-AUX...
  • Page 20 CONNECTIONS Connecting to the COMPONENT VIDEO jacks You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using COMPONENT VIDEO connections. Note Be sure to connect your video source components in the same way you connect your video monitor to this unit. For example, if you connect your video monitor to this unit using a COMPONENT VIDEO connection, connect your video source components to this unit using the COMPONENT VIDEO connection.

  • Page 21: Connecting Audio Components

    Connecting audio components Connecting a CD player Connect the output jacks of your CD player to the CD jacks of this unit. To make a digital connection to a CD player, select the corresponding setting for DIGITAL INPUT jacks in “INPUT ASSIGN”...

  • Page 22: Connecting The Fm And Am Antennas

    If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

  • Page 23: Connecting The Power Cable

    Connecting the power cable Once all connections are complete, plug the power cable into the AC wall outlet. Power cable IMPEDANCE SELECTOR (U.S.A. model) CAUTION IMPEDANCE SELECTOR (U.S.A. and Canada models only) Before connecting the power cable into the AC wall outlet, check that the impedance selector setting is correct.

  • Page 24: Setup

    SETUP The “BASIC MENU” feature is a useful way to set up your system quickly and with minimal effort. • If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU” (see page 53). •...
  • Page 25 Press d to confirm your selection and then press j / i to select the number of speakers connected to this unit. – – ENTER A-E/CAT. PRESET/CH Choice Display Speakers 2spk Front L/R SL SB SR L L C R 3spk Front L/R, Center SL SB SR...
  • Page 26 SETUP Press j / i to adjust the balance between the front left and right speakers. – ENTER A-E/CAT. PRESET/CH Press d / u to select a speaker and then j / i to adjust the balance. Press i to increase the value. Press j to decrease the value.

  • Page 27: Playback

    CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.
  • Page 28 PLAYBACK Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level. VOLUME Note If you connected a recording component to the VCR OUT, or MD/CD-R OUT (REC) jacks, and you notice distortion or low volume during playback from other components, try turning on the recording component.

  • Page 29: Additional Operations

    Additional operations Listening with headphones using SILENT CINEMA SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs (see page 31).
  • Page 30 PLAYBACK Selecting the input modes This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. • We recommend setting “INPUT MODE” to “AUTO” in most cases. • You can adjust the default input mode of this unit by using the “INPUT MODE”...

  • Page 31: Using The Test Tone

    Using the test tone Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position. This is also possible when playing sources input at the MULTI CH INPUT jacks. Press AMP on the remote control and then press TEST.
  • Page 32 PLAYBACK Displaying information about the input source You can display the format, sampling frequency, channel and bit rate of the current input signal. Press one of the input selector buttons on the remote control to select the desired input source. Press AMP on the remote control and then press STRAIGHT to select “STRAIGHT”.
  • Page 33 Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. Press SLEEP on the remote control repeatedly to set the amount of time.

  • Page 34: Sound Field Programs

    This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

  • Page 35: Sound Field Program Descriptions

    Sound field program descriptions Remote control Program button 2CH STEREO 2CH STEREO Concert Hall The Roxy Thtr MUSIC Game ENTERTAIN TV Sports Movie Spacious MOVIE Movie Dramatic STANDARD STANDARD 5CH STEREO 5CH STEREO The sound field programs are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set “INPUT MODE” to “AUTO” (see page 26) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.

  • Page 36: Editing Sound Fields Parameters

    SOUND FIELD PROGRAMS Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press AMP on the remote control and then STANDARD on the remote control repeatedly to select a decoder. You can select from the following decoders depending on the type of source you are playing and your personal preference.
  • Page 37 For 2CH STEREO: Direct DIRECT Function: 2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. Choices: AUTO, OFF • The “AUTO” setting bypasses the decoders and DSP processors only when “BASS”...

  • Page 38: Recording

    RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. •...

  • Page 39: Fm/Am Tuning

    There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups).

  • Page 40: Manual Tuning

    FM/AM TUNING Manual tuning If the signal received from the station you want to select is weak, tune into it manually. Note Manually tuning into an FM station automatically switches the tuner to monaural reception to increase the signal quality. STANDBY PRESET/TUNING/CH MEMORY...

  • Page 41: Automatic Preset Tuning

    Automatic preset tuning You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number.

  • Page 42: Manual Preset Tuning

    FM/AM TUNING Manual preset tuning You can also store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) manually. STANDBY PRESET/TUNING FM/AM PRESET/TUNING/CH MEMORY A/B/C/D/E SEARCH MODE CATEGORY EDIT NEXT SET MENU MAN'L/AUTO FM PROGRAM...

  • Page 43: Selecting Preset Stations

    Selecting preset stations You can tune into any desired station simply by selecting the preset station group and number under which it was stored. STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING/CH MEMORY SEARCH MODE CATEGORY EDIT NEXT SET MENU MAN'L/AUTO FM PHONES SPEAKERS STRAIGHT PROGRAM...

  • Page 44: Exchanging Preset Stations

    FM/AM TUNING Exchanging preset stations You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”. STANDBY PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING/CH MEMORY SEARCH MODE CATEGORY EDIT SET MENU MAN'L/AUTO FM NEXT...

  • Page 45: Xm® Satellite Radio Tuning

    ® What is XM Satellite Radio? XM Satellite Radio is the satellite radio service with millions of listeners across the United States, broadcasting live daily. The XM Satellite Radio channel lineup includes more than 150 digital channels of choice from coast to coast: 67 commercial-free music channels, featuring hip hop to opera, classical to country, bluegrass to blues;...

  • Page 46: Xm Satellite Radio Controls And Functions

    XM® SATELLITE RADIO TUNING XM Satellite Radio controls and functions Note The following controls are available only when “XM” is selected as the input source. Press INPUT l / h on the front panel repeatedly so that “TUNER” is displayed in the front panel display and then press XM on the front panel repeatedly (or press TUNER on the remote control and then press BAND repeatedly) to select “XM”...

  • Page 47: Activating Xm Satellite Radio

    Activating XM Satellite Radio To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID number is required. Follow the procedure below to check your ID number, and then visit the website at “http://activate.xmradio.com/” or call “1-800-XM-RADIO (1-800-967-2346)”...

  • Page 48: Basic Xm Satellite Radio Operations

    XM® SATELLITE RADIO TUNING Basic XM Satellite Radio operations STANDBY PRESET/TUNING/CH PRESET/TUNING FM/AM A/B/C/D/E SEARCH MODE CATEGORY EDIT NEXT SET MENU STRAIGHT PROGRAM PHONES SPEAKERS A/B/OFF INPUT MODE EFFECT BASS/TREBLE TONE CONTROL SILENT CINEMA MD/CD-R TUNER SLEEP DTV/CBL V-AUX MULTI CH IN AUDIO DISC SKIP CODE SET...

  • Page 49: Selecting The Xm Satellite Radio Search Mode

    Selecting the XM Satellite Radio search mode You can search for the desired channel using one of the three search modes (All Channel Search, Category Search, and Preset Search modes). You can also enter the channel number directly to select the desired channel by using the Direct Number Access mode (see page 48).

  • Page 50: Category Search Mode

    XM® SATELLITE RADIO TUNING Category Search mode STANDBY PRESET/TUNING/CH MEMORY PRESET/TUNING FM/AM A/B/C/D/E SEARCH MODE CATEGORY EDIT NEXT SET MENU MAN'L/AUTO FM PHONES SPEAKERS STRAIGHT PROGRAM INPUT A/B/OFF INPUT MODE EFFECT BASS/TREBLE TONE CONTROL SILENT CINEMA 2CH STEREO MUSIC ENTERTAIN MOVIE STANDARD 5CH STEREO...
  • Page 51 Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting XM Satellite Radio preset channels” on page 49. All preset channels (A1 to E8) recalls “001 Preview” by the initial factory setting.

  • Page 52: Direct Number Access Mode

    XM® SATELLITE RADIO TUNING Direct Number Access mode MD/CD-R TUNER SLEEP DTV/CBL V-AUX MULTI CH IN AUDIO DISC SKIP CODE SET VOLUME – – – MUTE INPUT MUTE 2CH STEREO MUSIC ENTERTAIN MOVIE STANDARD 5CH STEREO SPEAKERS NIGHT STRAIGHT ENT. LEVEL SET MENU TITLE...

  • Page 53: Setting Xm Satellite Radio Preset Channels

    Setting XM Satellite Radio preset channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode”...

  • Page 54: Displaying The Xm Satellite Radio Information

    XM® SATELLITE RADIO TUNING Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing. The preset channel number appears in the front panel display.
  • Page 55 When the channel number/name is displayed: [040] Deep Tra When the channel category is displayed: <CAT>Rock When the artist name/song title is displayed: Coldplay / Clo • The front panel display can indicate up to 14 alphanumeric characters at once. You can set whether to display the XM Satellite Radio information in the front panel display in a continuous manner or by 14 alphanumeric characters at once by using the “SCROLL”...

  • Page 56: Set Menu

    SET MENU You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

  • Page 57: Using Set Menu

    Using SET MENU Use the remote control to access and adjust each parameter. VOLUME – – – MUTE INPUT MUTE 2CH STEREO MUSIC ENTERTAIN MOVIE STANDARD 5CH STEREO SPEAKERS NIGHT STRAIGHT ENT. LEVEL SET MENU MENU TITLE BAND SRCH MODE –...
  • Page 58 SET MENU Surround left/right speakers 1C SURR Choices: LRG (large), SML (small), NON (none) • Select “LRG” if you have large surround left and right speakers. The entire range of the surround channel signals is directed to the surround left and right speakers.

  • Page 59: Input Menu

    Dynamic range 4 D.RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Choices: MIN (minimum), STD (standard), MAX (maximum) Speaker SP D.R Adjusts the speaker compression.

  • Page 60: Option Menu

    SET MENU OPTION MENU Use this menu to adjust the optional system parameters. Display settings 1 DISPLAY SET Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Choices: – 4 to 0 Control step: 1 •...

  • Page 61: Remote Control Features

    REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other audiovisual components made by YAMAHA and other manufacturers. To control other components, you must set up remote control with the appropriate remote control codes (see page 59).

  • Page 62: Controlling Other Components

    REMOTE CONTROL FEATURES Controlling other components Once you set the appropriate remote control codes (see page 59), use the input selector buttons to select the component you want to control. Note that some buttons may not correctly operate the selected component. Notes This button functions only when the original remote control of the component has a POWER button.

  • Page 63: Setting Remote Control Codes

    Note You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is initially set as listed above. In this case, try setting other YAMAHA remote control codes. While holding down CODE SET, press one of the input selector buttons to select the component you want to set up.

  • Page 64: Troubleshooting

    Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center. General...
  • Page 65 Problem The sound suddenly The protection circuitry has been activated goes off. because of a short circuit, etc. The sleep timer has turned off this unit. The sound is muted. Sound is heard from Incorrect cable connections. the speaker on one side only.
  • Page 66 TROUBLESHOOTING Problem Dolby Digital or DTS The connected component is not set to sources cannot be output Dolby Digital or DTS digital played. (Dolby Digital signals. or DTS indicator in “INPUT MODE” is set to “ANALOG”. the front panel display does not light up.) A humming sound is Incorrect cable connections.
  • Page 67 Tuner Problem FM stereo reception is The characteristics of FM stereo noisy. broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. There is distortion, and There is multi-path interference. clear reception cannot be obtained even with a good FM antenna.
  • Page 68 TROUBLESHOOTING Remote control Problem The remote control Wrong distance or angle. does not work nor function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The remote control code is not correctly set.

  • Page 69: Resetting The System

    RESETTING THE SYSTEM Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. • The initial factory settings are activated next time you turn on this unit. To cancel the initialization procedure at any time without making any changes, press STRAIGHT repeatedly to select “CANCEL”...

  • Page 70: Glossary

    GLOSSARY Audio information Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (Low Frequency Effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel).

  • Page 71: Sound Field Program Information

    SILENT CINEMA YAMAHA has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field program so that accurate representations of all the sound field programs can be enjoyed on headphones.

  • Page 72: Specifications

    SPECIFICATIONS AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 /6 ... 110 W [Other models] 1 kHz, 0.9% THD, 6 ... 100 W • Maximum Output Power [Europe model] 1 kHz, 0.7% THD, 4 •...
  • Page 73 FISHER 295, 233 THOMSON FRABA TOSHIBA FUNAI 277, 278 293, 297, 234, VIDECH 235, 236 WARDS GOODMANS 296, 298, 223 YAMAHA GRUNDIG 229, 238, 249 HITACHI 297, 239, 242, 243, 285 IRRADIO ADMIRAL ITT/NOKIA 244, 245 AIWA JC PENNY 293, 297, 234,...
  • Page 74 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

Table of Contents