Recording - Yamaha RX-V359 Owner's Manual

RECORDING

Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
Notes
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The settings of TONE CONTROL (see page 24), VOLUME, speaker levels (see page 26) and the sound field programs (see page 31)
do not affect recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if
your source component is connected to provide only digital signals, you cannot record the source.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
• The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks.
y
Do a test recording before you start an actual recording.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
SEARCH MODE XM CATEGORY
EDIT
l
STRAIGHT PROGRAM
PHONES SPEAKERS
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
POWER POWER
TV TV
CD
2
DVD
REC
(U.S.A. model)
34
RECORDING
(U.S.A. model)
VOLUME
l h
PRESET/TUNING/CH MEMORY TUNING MODE
DISPLAY
SET MENU MAN'L/AUTO FM AUTO/MAN'L
NEXT
h l h
INPUT
INPUT MODE MULTI CH INPUT
2
POWER STANDBY POWER
AV
MD/CD-R TUNER SLEEP
DTV/CBL VCR V-AUX
MULTI CH IN
AUDIO
1
Turn on all the connected components.
2
Press INPUT l / h on the front panel
repeatedly (or press one of the input selector
buttons on the remote control) to select the
source component you want to record from.
INPUT
Front panel
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
CD MD/CD-R
or
DVD DTV/CBL VCR V-AUX
Remote control