Ricoh Priport JP5000 Operating Instructions Manual page 58

Operation
F
Enter the vertical original size
with the Number keys and press
the {q} key.
1
Note
To change the value entered,
press the {Clear/Stop} key and
enter the new value.
Up to 999mm, 99.9" can be en-
tered.
G
Enter the vertical print size with
the Number keys and press the
{q} key.
H
Enter the horizontal original size
with the Number keys and press
the {q} key.
I
Enter the horizontal print size
with the Number keys.
J
Press the [OK] key.
The machine will select appropri-
ate reproduction ratios for the ver-
tical and horizontal directions.
K
Make sure that the original and
the print paper are the correct
size.
L
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
38
M
Press the {Start} key.
N
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.23 "Adjusting
the Position of Printed Images").
O
Make your prints.