Ricoh Priport JP5000 Operating Instructions Manual page 129

M
When you select Photo mode, se-
lect the coarseness and image
density with the [←] [→] or {~}
{}} keys.
Note
Four coarseness settings are
available:
• Setting 4: coarsest
• Setting 3: coarser than setting
2
• Setting 2: coarser than setting
1
• Setting 1: coarser than the
standard setting
N
Press the [OK] key.
O
Set the command sheets and orig-
inal face up into the document
feeder.
Note
Make sure that the command
sheets are set on the original.
P
Press the {Start} key.
Note
If a command sheet or an origi-
nal misfeeds, remove the misfed
sheets or original and reset it
into the document feeder. It is
not necessary to reset the previ-
ous command sheets or origi-
nal.
Make-up Printing with the Optional Document Feeder
2
109