Ricoh Priport JP5000 Operating Instructions Manual page 26

15.
{Class} key
Press to select All Class, Auto Class,
Manual Class, or Class mode. See ⇒ P.50
"All Class Mode—Making Variable Num-
bers of Prints from the Same Original Using
All Stored Data", ⇒ P.52 "Auto Class
Mode— Making Variable Numbers of Prints
from the Same Original Using Stored Data",
⇒ P.55 "Manual Class Mode with one Orig-
inal—Making Variable Numbers of Prints
from the Same Original", ⇒ P.57 "Manual
Class Mode with 2 or More Originals—Mak-
ing Variable Numbers of Prints from Differ-
ent Originals", ⇒ P.60 "Class Mode—
Making Fixed Numbers of Prints from the
Same Original".
16. {W} {V} keys (Speed keys)
Press to adjust the printing speed. See ⇒
P.24 "Adjusting the Image Density of
Prints", ⇒ P.26 "Changing the Printing
Speed".
17.
{~}{}}{|}{{} keys
Press to shift the image forward, back-
ward, right, or left. See ⇒ P.23 "Adjusting
the Position of Printed Images".
Also use to highlight items you wish to
select on the panel display.
18.
{Program} key
Press to input or recall programs. See ⇒
P.71 "Programs—Storing Your Print Set-
tings in Memory".
19.
Number keys
Press to enter the desired number of
prints and data for selected modes.
20. {Clear/Stop} key
Press to stop printing.
21.
{q} key
Use to enter data in selected modes.
22. {Clear Modes/Energy Saver} key
Press to clear any previously entered job
settings.
23. {Start} key
Press to make a master.
6
24.
{Auto Cycle} key
Use to process the master and make
prints in one operation. See ⇒ P.48 "Auto
Cycle—Making Master and Prints in one
Operation".
25.
{Proof} key
Press to make proof prints.
26. {Print} key
Press to start printing.