Ricoh Priport JP5000 Operating Instructions Manual page 121

Diagonal line method
Note
A diagonal line must be drawn through the area that you wish to edit.
A
Put the command sheet on top of the original.
B
Draw a line using a felt tip pen (black, red or blue) with a thickness of at
least 1mm.
Note
Make sure there is no break in the line.
The diagonal line can be drawn from left to right or vice versa.
Draw the line at least 2mm, 0.08", away from the image so that the com-
plete image can be recognized.
c
d
a, b, c, d = 2mm, 0.08"
The line marking the designated area should be more than 2mm, 0.08",
from any neighboring image.
ZM-20
ZM-21
a
b
GRCOMM1E
Command Sheets for Make-Up Printing
2
101