Optional Functions
2
a, b, c = 2mm, 0.08"
Closed area method
Note
The line designating the area must be a closed loop.
A
Put the command sheet on top of the original.
B
Using a black, red, or blue felt tip pen, draw a line around the area to des-
ignate. The line should have a thickness of at least 1mm.
Note
Make sure there is no break in the line.
Draw the line at least 2mm, 0.08", away from the image so that the com-
plete image can be recognized.
102
a
b
c
GRCOMM2E
ZM-20
ZM-26