Table of Contents
Advertisement
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Think Safety First
Please read all safety instructions and symbols in the
safety section. Knowing this information could help
you or bystanders avoid injury.
DANGER
Operating on wet grass, ice or slippery steep
slopes can cause sliding and loss of control.
Wheels dropping over edges can cause roll
overs, which may result in serious injury,
death or drowning.
Read and follow the rollover protection
instructions and warnings.
To avoid loss of control and possibility of
rollover:
• Do not operate near drop-offs or near
water.
• Reduce speed and use extreme caution on
slopes.
• Avoid sudden turns or rapid speed
changes. Always use seat belts
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operators ear and can
cause hearing loss through extended periods
of exposure.
Wear hearing protection when operating this
machine.
The use of protective equipment for eyes, ears, feet
and head is recommended.
Figure 12
1. Warning— wear hearing protection
Operating the Front
Attachment
To operate the front attachment, use the rocker
switches as indicated in
1. Front attach raise and hold 3. Swing front attachment
2. Tap to float front attach
down. Hold to power
down.
Important:
Do not hold down the power down
switch once the attachment has been fully
lowered; this can cause significant hydraulic
system damage and result in front attachment
damage.
To use front attachments:
Remove the mower deck as shown in
Cutting Deck (page
shown in
5 Mounting the Driveshaft (page
Important:
The driveshaft cannot be mounted to
the front attachment with the deck installed, or
else the machine will be damaged.
WARNING
Using non-powered front attachments with
the front deck installed could injure someone
or damage the machine.
Do not use non-powered front attachments
with the front deck installed.
g000504
9
Figure
13.
Figure 13
right
4. Swing front attachment left
1 Removing the
3), then mount the driveshaft as
g268384
7).
Advertisement
Table of Contents
