Power Sources - Jensen MCR-1000 User Manual

This unit operates on 120V~ 60Hz or 8 x DC1.5V "D" (UM-1) batteries (not included). Do not
attempt to operate the unit on any other power source. You could cause damage to the unit and
void your warranty.
Please be sure the power outlet you plug this unit into is working and receives constant
(unswitched) power.
AC OPERATION
Plug the detachable AC cord into a standard AC outlet (120V~60Hz).
1. When the AC power cord (included) is connected to the AC Power Socket on the back of
the unit and the other end is plugged into a 120V AC~ 60Hz wall outlet, the unit will
disconnect the batteries automatically, and operate on AC Power only.
2. Slide the FUNCTION SWITCH to "CD" position for CD play, AUX for AUX IN play, "RADIO"
for AM/FM radio, "TAPE/OFF" for cassette recorder play or for turning the power OFF.
WARNING:
 Before connecting to the power outlet, ensure that the outlet corresponds to the information on
the rating label at the back of the apparatus.
BATTERY OPERATION
1. Remove the BATTERY DOOR.
Install 8 x DC1.5V "D" (UM-1) batteries (not included) according to the polarity diagram inside
2.
the battery compartment.
Note: For best performance, alkaline-type batteries are recommended.
3. Replace the BATTERY DOOR.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the
unit and void the warranty.

POWER SOURCES

E-8