Automatic Stop - Jensen MCR-1000 User Manual

3. Press the Cassette FAST FORWARD
advance or rewind the tape.
4. Press the Cassette PAUSE
playback.
5. Press the Cassette STOP/EJECT

AUTOMATIC STOP

To protect your cassette tapes and prevent unnecessary wear to the pinch roller of the cassette
mechanism, this unit is equipped with an Automatic Stop System. When the tape ends during
play, the Cassette Play button will automatically release to stop the cassette from running.
CONTINUOUS PLAYBACK OF TWO CASSETTES
1. Insert prerecorded tapes into both cassette compartments with the tape you want to play first in
DECK B.
2. Press the PLAY
3. Press the PAUSE
4. When the tape in DECK B ends, it stops and the PAUSE
automatically begin playback of DECK A.
NOTE: Continuous playback will not function if you play the tape in DECK A first.
RECORDING (CASSETTE DECK A Only)
This cassette recorder features an Automatic Recording Volume Level Control System that
prevents overloaded or distorted recordings. You can change the volume level as often as you like
during the recording process. It will not have any effect on the volume level of the recording itself.
Insert a good quality blank tape into DECK A with the exposed tape facing down and the full reel
on the left side. Close DECK A door.
A. RECORDING FROM TAPE (DECK B TO DECK A)
This unit enables you to duplicate a pre-recorded tape to another tape. It is performed only one
way from deck B (playback) to deck A (recording).
 Slide the FUNCTION SWITCH to "TAPE" position.
 Inset a pre-recorded cassette into deck B and a blank cassette tape into deck A.
 Press the PAUSE
buttons at the same time until they lock down.
 Press the PLAY
automatically release to start recording.
 Press the PAUSE
button to pause the playback, press it again to resume the
button to stop operation.
button of DECK B to begin playback.
button and then PLAY
亡I
L
button and then press down on the deck A RECORD
button to start playback on deck B, the PAUSE
button on deck A and the STOP
button or the Cassette REWIND
button of DECK A.
button of DECK A will release and
button on deck B when finished.
E-11
button to rapidly
。
g
and PLAY
button on deck A will