Troubleshooting - Yamaha MOTIF RACK Music System Owner's Manual

Troubleshooting

If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following.
Sound does not change when using the knobs or sliders.
• Are the MIDI Out port and Device Number set correctly in the "Setup dialog"?
Bulk data is not transmitted.
• Are the MIDI Out port and Device Number set correctly in the "Setup dialog"?
• Is the Dump Interval in the "Setup dialog" too short? Make sure to adjust the Dump Interval.
Bulk data is not received. Time-out errors are frequent.
• Are the MIDI Out port and Device number set correctly in the "Setup dialog"?
• Depending on the host application, you may need to turn MIDI Thru setting off in the host
application.
• When running the Multi Part Editor as an SQ01 plug-in, reduce the buffer size in SQ01
under [Setup] menu → [MIDI] → [System Exclusive] → Receive Buffer Size.
The MIDI In/Out port is not available in the "Setup dialog".
• Only MIDI Ports selected in the host applications MIDI Setup can be selected in the "Setup
dialog". Confirm the ports selected in the host application.
Remote operation functions don't work.
• Is the remote output port set correctly in the "Setup dialog"?
• Is the remote operation device configured correctly? When using the 01X as a remote oper-
ation device, make sure the REMOTE and MIDI buttons are on.
Parts using User Voices do not sound correctly.
• Has the User Voice data been transmitted to the MOTIF-RACK?
By transmitting the Multi settings, you can play the MOTIF-RACK with the newly transmitted
voice data.
Noise is audible during remote operation
For Windows XP users:
• The condition may improve if you enable Hyper-Threading in the BIOS settings.
For information on how to enable Hyper-Threading, refer to the owner's manual of your
computer.
(page
37
(page 31)
(page 31)
(page 31)
31)
(page 32)