Troubleshooting - Yamaha S70XS Installation Manual

When starting the S90 XS/S70 XS Editor VST after the installation and controlling the S90 XS/S70
XS from your computer via a USB cable, the S90 XS/S70 XS does not operate correctly.
• Did you install the latest Driver?.....................................................................................................................
• Is the USB cable used to connect the S90 XS/S70 XS to your computer connected correctly?
.................................................................................................................................................... S90 XS/S70 XS Owner's Manual
• If your computer has automatically activated any power-saving mode (such as suspended, sleep, standby) when
you make a USB connection, the computer may "freeze," or the driver may stop working. When using a USB cable,
disable any power-saving mode on the computer.
• Confirm whether or not a proper USB cable is used.
If the USB cable is broken or damaged, have the USB cable replaced with a known working one.
• Do not use a USB hub for connecting multiple USB devices.
Screen redrawing is slow or stopped.
• Does your computer satisfy the system requirements? .................................................................................
• Is any other application or device driver running?
Quit the device driver or any unnecessary applications before operating the S90 XS/S70 XS Editor VST.
S90 XS/S70 XS Editor VST Installation Guide

Troubleshooting

U.R.G., Digital Musical Instruments Division
© 2009-2011 Yamaha Corporation
110MW-B0
page 4
page 4
6