Non-Combustible Mantel And Wall Projections - Heatilator NDV30-IFT Installation Manual

C. Non-combustible
Projections
Only decorative barrier fronts certified for use with this
appliance model may be used. Contact your dealer for a
list of decorative fronts that may be used. The finishing
material thicknesses allowed are noted below.
18 in.
FLUSH WITH FIREPLACE OPENING (TOP OF HOOD)
Figure 10.3 Minimum Vertical and Maximum Horizontal
Dimensions for Non-Combustibles Mantels
* Note: When using a DEMI or TRES decorative barrier
front a 1/2 in. clearance must be maintained from the
fireplace opening to allow room for decorative barrier
front removal / install.
Non-Combustible Mantel Legs or Wall Projections
TOP OF
APPLIANCE
**
FIREPLACE OPENING
See Dimension B on
Appliance Dimension
Diagram.
Figure 10.4 Non-Combustible Mantel Leg or Wall Projections
(Acceptable on both sides of opening)
** Note: When using a DEMI or TRES decorative
barrier front a 1/4 in. clearance must be maintained on
both sides of the fireplace opening to allow room for
decorative barrier front removal / install.
Heatilator • NDV30-IFT, NDV33-IFT, NDV36-IFT, NDV36-IFT-NVR, NDV42-IFT Installation Manual • 2620-980 Rev. C • 8/20
52
Mantel and Wall
30 in. minimum
to ceiling
*
DRYWALL
18 in.