Risk Of Fire; Communication With Sme; Fig. 1-21 Risk Of Fire; Fig. 1-22 Communication With Sme - Mitsubishi S16R Series Operation & Maintenance Manual

1 SAFETY

Risk of Fire

Making efforts to prevent fire is by all means
important, but it is necessary to train the
procedures to follow in an event of a fire on a
routine basis.
The following is a general fire prevention
measures.
• Do not leave combustible materials near the
fire-using area.
• If you have to use a flame temporarily, obtain
permission from the user company or
supervisor before conducting the
corresponding work.
• When conducting welding or gas cutting
works, cover with an incombustible sheet
and prevent a flame.
• While using a flame, prepare fire
extinguishers.
• After using a flame, clean up the site.
• Prepare fire extinguishers and fire hydrants,
and replace them with new ones
periodically.
• If the insulation of an electrical wiring is
damaged, repair or replace it immediately.
• To prevent a fire due to old and deteriorated
wiring, check and replace deteriorated
wiring.
• Control build up of static electricity.
In addition to these, always conduct the measures
for preventing a fire.

Fig. 1-21 Risk of Fire

72

Communication with SME

Please inform SME about the points you have
noticed about safety when contracting and having
the engine delivered, or while operating the engine.
SME is willing to have sufficient communication
with the customer.

Fig. 1-22 Communication with SME

• For the details described in this
Operation & Maintenance Manual, if
you want to have more detailed
information or questions, contact your
SME dealer
8)
• If you establish the protection
measures, use this Operation &
Maintenance Manual and warning
labels on this engine and each device
as "Usage Information".
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
"CONTACT LIST" (→ Page
Pub. No. K29001-00320 Revision: 1