Scheduled Maintenance; Inspection And Maintenance - Mitsubishi S16R Series Operation & Maintenance Manual

Diesel engine
Hide thumbs Also See for S16R Series:
Table of Contents

Advertisement

1 SAFETY
When handling coolant (LLC), always
wear suitable personal protective
equipment such as rubber gloves and
protective eyeglasses.
* If LLC comes into contact with your eyes, it will
result in sight loss at the worst.
* If LLC comes into contact with your skin while
the engine is hot, you could get burned by heat.
■ Maintenance of LLC
<Replacement Period>
Do not use LLC after the
recommended storage expiration
date.
* Otherwise, the devices could be damaged.
■ LLC Concentration
Keep LLC to be the specified
concentration.
* If LLC concentration is low, it could cause
corrosion of the radiator or heat exchanger.
* If LLC concentration is high, it may cause
damage to the devices or overheat due to the
seized engine parts.

SCHEDULED MAINTENANCE

Do not take actions for items
indicated as "Contact your SME
dealer" in the measure column in the
Scheduled Maintenance.
* Otherwise, serious accident, environmental
pollution or damage to the devices may occur.
Be sure to contact your SME dealer.
Be sure to perform the pre-operation
check and scheduled maintenance as
instructed in this Operation &
Maintenance Manual.
* Failure to perform the pre-operation check and
scheduled maintenance may cause various
engine problems and breakage to parts, which
may result in serious accidents.
42
INSPECTION AND
MAINTENANCE
■ Precautions for General Inspection
and Maintenance
Before starting the engine, pull out
the manual turning gear shaft.
* Starting the engine while the turning gear is
engaged with the ring gear could result in
serious personal injury or destruction of the
engine.
Before inspecting and maintaining the
engine, read this Operation &
Maintenance Manual thoroughly to
understand the construction and the
required work to service the
corresponding part. In addition,
conduct the work after fully studying
the procedure
* In case of conducting the work without studying
enough, an accident or damage due to wrong
installation, or deterioration in the exhaust gas
properties may occur.
Do not make any modifications to the
engine without our previous written
agreement.
* Otherwise, damage to the devices or significant
environmental pollution may occur.
* In such a case, the whole warranty will become
invalid.
Do not work while standing on the
engine.
* Otherwise, you may slip and fall by accident,
and get injured.
* In addition, the devices or pipes may be
damaged.
Do not disconnect the fuel or engine
oil piping while the engine is
operating or at high temperature.
* Otherwise, fuel could come in contact with the
engine, which could cause a fire.
Do not disconnect the pipes
immediately after the engine is
stopped.
* Otherwise, you could get burned by hot engine
oil or coolant splashing out.
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
Pub. No. K29001-00320 Revision: 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents