Mitsubishi S16R Series Operation & Maintenance Manual page 90

3 OPERATION
Before starting the engine, check that
there are no bolts, nuts, tools, etc.
around the rotating parts.
* When the rotating parts work, the above objects
can fly and cause personal injury or damage to
the surrounding.
* Entanglement in rotating parts could cause
machine damage.
Check that the terminals and
connectors of the electrical system
are connected correctly.
* Otherwise, starting failure or overrun due to
inability to stop the engine could occur.
• Obey the environmental requirements
such as ambient temperature and
humidity specified in the contract
specifications.
Otherwise, overheat or overcooling
may occur.
In case of overheat or overcooling,
contact your SME dealer
LIST" (→ Page 8).
• Do not install the engine in the
following places:
• In a dusty place
• In an atmosphere of inflammable gas
• In a place where salt damage may
occur
Otherwise, a fire or damage to the
devices may occur.
• Operating the engine in an environment
exposed to strong electromagnetic
fields may cause uncontrollability or
overrun of the engine due to the
malfunction of the electronic governor.
When operating the engine in an
environment possibly exposed to
strong electromagnetic fields, contact
your SME dealer "CONTACT LIST" (→
Page 8).
90
"CONTACT
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
Make sure the following measures are taken.
(a) Air intake port
• Prevent inrush of water (especially sea
water and rainwater)
• Prevent contamination by foreign materials
(b) Rotating parts
• Prevent contamination by foreign materials
• Prevent contact with human body (install a
protective cover)
(c) Hot parts
• Prevent contact with human body (confirm
warning labels)
(d) Electrical system
• Prevent adhesion of water and dust
(e) Ambient temperature
• Keep in the range between 5 and 40°C [41
and 104°F]
(f) Coolant temperature
• Control properly
(g) Additional equipment of generator (water
heater etc.)
• Control properly
Pub. No. K29001-00320 Revision: 1