Table 7-4 Scheduled Maintenance For Continuous; Table 7-5 Scheduled Maintenance For Continuous Use Engine (3/3) - Mitsubishi S16R Series Operation & Maintenance Manual

7 SCHEDULED MAINTENANCE

Table 7-5 Scheduled Maintenance for Continuous Use Engine (3/3)

Inspection and Maintenance
Period
Service
Service hours
period
Every 8000
- service hours
* 2
Every 2 Every 8000
years service hours
As required
*1: If the part is not supplied from Shanghai MHI Engine co., Ltd. (SME), service the part following the
supplier's operation manual.
*2: Service intervals vary depending on the use conditions. For details, see the rating definition
Definition" (→ Page
124
Service Items
<At the second overhaul>
Replace the following parts in addition to the parts listed
at the major overhaul.
Cylinder head bolts, valve guides, valve bridge guides,
valve bridge, valve spring, tappets, camshaft thrust
plates, pistons, piston pins, connecting rod bolts, rocker
bushings, fuel injection pipe assembly, oil pipe assembly
• Fuel Injection Pump - Inspect and Test (Replace parts as
needed.)
• Protective Devices - Repair and Replace *1
(High coolant temperature, low oil pressure, overspeeding,
starting stall, cooling water supply fault, undervoltage,
overvoltage, overcurrent, low coolant level in tank, low fuel
level in tank, low air pressure in tank, and others.)
• Auxiliary Devices Operation - Check *1
(Water heater, oil heater, oil priming pump, fuel transfer
pump, governor motor, and others.)
• Coolant - Change
• Fuel System - Bleed Air *1
• Radiator Fins - Check and Clean *1
• Pre-cleaner - Clean, Check and Replace
• Air Cleaner Element - Clean, Check, and Replace *1
• Inside of Engine Breather - Clean
• Stop Solenoid - Check or Replace
• Couplings - Check or Replace *1
• Vibration-Isolating Rubber - Check *1
120).
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
Reference
Page
8
(Contact your
SME dealer)
164
142
172
175
176
8
(Contact your
SME dealer)
"Rating
Pub. No. K29001-00320 Revision: 1