Install Media and Expansion Modules
7
Install Media and Expansion
Modules
NOTE:
In each gateway, a single expansion module can be installed in the lower left slot only. If
the S8300 is installed (in slot V1), up to 3 media modules can be installed in slots V2–V4.
If no S8300 is installed, a fourth media module can be installed in Slot V1.
20
1
To install a media module, first remove the
upper right blank faceplate.
2
Align the media module with the interior guides
and insert into slot until firmly seated.
3
Tighten the captive screws.
4
Repeat steps 1 through 3 for each media module
to be installed.
5
To install the expansion module, first remove
the lower left blank faceplate.
6
Align the expansion module with the interior
guides and insert into slot until firmly seated.
7
Tighten the captive screws.
Quick Start: G700 and S8300
June 2004