Connect Media Gateways
5
Connect Media Gateways
NOTE:
Complete these steps only if you are connecting more than one G700 Media Gateway in a
stack configuration.
Single-stack redundancy
16
1
Using the gray X330SC short cables,
connect the media gateways from the
bottom up:
•
Connect the light gray connector to
the port labeled "Cable to upper
unit."
•
Connect the dark gray connector to
the port labeled "Cable to lower
unit."
•
Repeat both steps until all units in
the stack are connected (maximum
of 10 units).
2
For single-stack redundancy, connect the
bottom unit and the top unit using the black
X330RC redundancy cable:
•
Connect the light gray connector to
the port labeled "Cable to upper
unit: on the top unit of the stack.
•
Connect the dark gray connector to
the port labeled "Cable to lower
unit" on the bottom unit of the stack.
Quick Start: G700 and S8300
June 2004