Singing Karaoke By Using Microphones; Listening With Headphones - Yamaha EMX-100RDS Owner's Manual

SINGING KARAOKE BY USING MICROPHONES

1
CD CHANGER RECEIVER EMX–100RDS
DISC
1 2 3
STANDBY/ON
PHONES

LISTENING WITH HEADPHONES

PHONES
CD CHANGER RECEIVER EMX–100RDS
DISC
1 2
STANDBY/ON
PHONES
MIC MIC MIXING
MIN MAX
INPUT SELECTOR VOLUME
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
FREQ PS/PTY/RT/CT MODE PTY SEEK START
RANDOM REPEAT TIME MEMORY AUTO/MAN'L
PROGRAM
HOUR MIN TIME ADJ
PTY SELECT PRESET/TUNING/BAND A/B/C/D/E
MUSIC
MIC MIC MIXING
USER MEMORY DISPLAY
MIN
3
INPUT SELECTOR VOLUME
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
3
FREQ PS/PTY/RT/CT MODE PTY SEEK START
RANDOM REPEAT TIME MEMORY AUTO/MAN'L
PROGRAM
HOUR MIN TIME ADJ
PTY SELECT PRESET/TUNING/BAND A/B/C/D/E
MUSIC
MIC MIC MIXING
USER MEMORY DISPLAY
MIN
This unit is equipped with two MIC jacks and a MIC MIXING
level control. These are available for singing karaoke or
some other use.
1
Connect one or two microphones to the MIC jack(s) on
the front panel.
2
Play back a karaoke source, and sing karaoke by using
the microphones. (For source playback, refer to pages
16 to 30)
3
While singing, adjust the mixing level of singing voice by
turning the MIC MIXING level control.
Note
You can record sound signals input from the microphone(s)
along with the selected input source onto a tape (or MD) by
using a tape deck, MD recorder, etc. connected to this unit.
TIMER
PTY SELECT
MAX
• Be sure that your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50 ohms
impedance. Recommended impedance is 32 ohms.
• When headphones are connected, the speakers are
defeated automatically and you can listen to the sound to
be output from the front speakers through headphones.
Adjust the VOLUME control for desired volume.
TIMER
PTY SELECT
MAX
E-38