Storing Your Own Programs - Yamaha EMX-100RDS Owner's Manual

STORING YOUR OWN PROGRAMS

CD CHANGER RECEIVER EMX–100RDS
DISC
1 2 3
STANDBY/ON
PHONES
USER
1 2
3 4
CD
1 2
1 2
6 7
6 7
A B
TIME PROG
MODE REPEAT RANDOM
DISC SKIP
1 CENTER/REAR
TEST FLAT
/DELAY
MUSIC
LEVEL
STANDBY/ON
SLEEP
VOLUME
2 1 1
INPUT SELECTOR VOLUME
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
FREQ PS/PTY/RT/CT MODE PTY SEEK START
RANDOM REPEAT TIME MEMORY AUTO/MAN'L
PROGRAM
HOUR MIN TIME ADJ TIMER
PTY SELECT PRESET/TUNING/BAND A/B/C/D/E PTY SELECT
MUSIC
MIC MIC MIXING
DISPLAY
USER MEMORY
MIN MAX
4, 2 2 3, 5
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
I0
OPEN/CLOSE TUNER
STOP PLAY/PAUSE
2
INPUT
4, 2 2
PROGRAM USER
DISPLAY
Your favorite pair of any equalizer mode (or an equalizer
pattern of your own adjusting) and any sound field program
can be stored as a user program. Up to 4 pairs can be stored
as desired.
To store
1
Select a desired equalizer mode by pressing the MUSIC
button.
* If desired, adjust the equalizer as you prefer by using
the equalizer control buttons.
2
Select a desired sound field program by pressing the
PROGRAM button.
3
Press the user program MEMORY button.
* "1" will flash on the user program number indicator and
the MEMORY indicator will flash for about 5 seconds.
4
Select the user program number (1, 2, 3 or 4) to which
you will store the selected modes by pressing the USER
button once or more before "1" stops flashing.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
USER 1
5
Press the user program MEMORY button before the
number selected in step 4 stops flashing.
* In the same way, store other pairs to other three user
positions.
* It is also a good idea to store only an equalizer pattern of
your own adjusting (without storing any sound field
program).
Notes
•
A new program can be stored in place of the former one.
•
In step 4 or 5, if the user program number indicator stops
flashing before operation, return to step 3.
To recall a user program
1 1
Play back a source. (For source playback, refer to pages
16 to 30)
2 2
Press the USER button once or more so that the user
program number you want to recall lights up.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
USER 1 USER 2
E-37
USER 2 USER 3
USER 4
USER 3 USER 4
OFF