Manual Preset Tuning - Yamaha EMX-100RDS Owner's Manual

TUNING OPERATION
CD CHANGER RECEIVER EMX–100RDS
DISC
1 2
STANDBY/ON
PHONES
4,
1
1
6
6
A
TIME PROG
MODE REPEAT
DISC SKIP
CENTER/REAR
TEST
/DELAY
LEVEL
SLEEP
3, 1 1 2, 5
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
3
FREQ PS/PTY/RT/CT MODE PTY SEEK START
RANDOM REPEAT TIME
PROGRAM
HOUR MIN
PTY SELECT PRESET/TUNING/BAND A/B/C/D/E
MUSIC
MIC
USER MEMORY DISPLAY
4, 2 2
2 2
CD
2 3 4 5
2 3 4 5
7 8 PRESET
7 8 9 0
3, 1 1
B C D E
+
I0
TUNER
RANDOM OPEN/CLOSE
STOP PLAY/PAUSE
INPUT
FLAT
MUSIC PROGRAM USER
STANDBY/ON
DISPLAY
VOLUME

Manual preset tuning

This unit can store station frequencies selected by tuning
operation. With this function, you can select any desired
station only by calling the corresponding preset station
number. Up to 40 stations (8 stations x 5 groups) can be
stored.
To store stations
(Example: To store a station to A1)
VOLUME
1
Tune in to a desired station.
(Refer to the previous page for tuning procedure.)
MEMORY AUTO/MAN'L
2
TIME ADJ TIMER
Press the tuner MEMORY button.
PTY SELECT
* "MEMORY" and "PRESET" will flash on the display for
MIC MIXING
about 5 seconds.
MIN MAX
3
Select a desired group (A – E) of preset stations by
pressing the A/B/C/D/E button confirming it on the
display, before "MEMORY" goes out.
(In this case, select group A.)
4
Select a preset station number by pressing the
button repeatedly before "MEMORY" goes out.
(In this case, select "1".)
5
Within about 5 seconds, press the tuner MEMORY button
again.
PRESET
The currently displayed station
has been programmed to A1.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
numbers of other groups in the same way by selecting
other groups in step 3.
To recall a preset station
1 1
Select a group of preset stations by pressing the
A/B/C/D/E button.
2 2
Select the desired preset station number by pressing the
or
Notes
•
A new setting can be programmed in place of the former
one.
•
For presets the setting of the AUTO/MAN'L button is
stored along with the station frequency.
For easier operation
By using the preset station number buttons and the
A,B,C,D,E selector buttons on the remote control transmitter,
a preset station number and a group can be selected directly.
E-24
TAPE 1
AUTO
MHz
button repeatedly.
or