Adjustment - Yamaha EMX-100RDS Owner's Manual

SPEAKER BALANCE ADJUSTMENT
CD
1 2
1 2
6 7
6 7
A B
TIME PROG
MODE REPEAT RANDOM
DISC SKIP
CENTER/REAR
TEST FLAT
7 /DELAY
MUSIC
LEVEL
STANDBY/ON
SLEEP
VOLUME
6
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
I0
TUNER
OPEN/CLOSE
STOP PLAY/PAUSE
INPUT
PROGRAM USER
DISPLAY
6
Adjust the sound output levels of the center speaker and
the rear speakers by using the LEVEL control buttons so
that they become almost as same as that of the front
speakers.
When the test tone is output from the center speaker,
pressing the LEVEL control buttons change the output
level of the center speaker.
MUSIC PROGRAM USER NOR TEST
PRO LOGIC
100 350 1K 3.5K 10K
When the test tone is output from the rear speakers,
pressing the LEVEL control buttons change the output
level of the rear speakers.
NOR TEST
MUSIC PROGRAM USER
PRO LOGIC
100 350 1K 3.5K 10K
* Pressing the + button raises and the – button lowers the
level.
7
If the adjustments are finished, press the TEST button to
cancel the test tone.
* "TEST" disappears from the display.
Notes
Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the VOLUME control (or the VOLUME keys on the remote
control transmitter) only.
In step 6, if the center channel mode is in the "PHANTOM"
position, the sound output level of the center speaker
cannot be adjusted. This is because in this mode, the
center sound is automatically output from the left and right
front speakers.
E-15
Adjustable
Adjustable