Operating External Units Connected With This Unit - Yamaha EMX-100RDS Owner's Manual

OPERATING EXTERNAL UNITS CONNECTED WITH THIS UNIT

CD CHANGER RECEIVER EMX–100RDS
DISC
1 2
STANDBY/ON
PHONES
1
1
6
6
A
TIME PROG
MODE REPEAT
DISC SKIP
CENTER/REAR
TEST
/DELAY
LEVEL
SLEEP
3, 2 2
1, 1 1
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
3
FREQ PS/PTY/RT/CT MODE PTY SEEK START
RANDOM REPEAT TIME
PROGRAM
HOUR MIN
PRESET/TUNING/BAND A/B/C/D/E
PTY SELECT
MUSIC
MIC
DISPLAY
USER MEMORY
CD
2 3 4 5
2 3 4 5
7 8 PRESET
7 8 9 0
B C D E
+
I0
RANDOM OPEN/CLOSE TUNER
STOP PLAY/PAUSE
1, 1 1
INPUT
FLAT
MUSIC PROGRAM USER
STANDBY/ON
DISPLAY
VOLUME
To listen to or watch a source on an
external unit connected with this
unit
1
Select the position of input source (TAPE MD, AUX, VCR
or LD TV) you will play back by turning the INPUT
SELECTOR until the corresponding name appears on the
display.
* The names of input source positions correspond with
the names of terminals to connect with external units
on the rear of this unit.
2
VOLUME
Play back the source.
(For a video source, turn the monitor TV on.)
3
Adjust the volume to a desired level by using the
MEMORY AUTO/MAN'L
TIME ADJ TIMER
PTY SELECT
VOLUME control.
If you prefer, use the graphic equalizer and/or the sound
MIC MIXING
field processor built into this unit.
MIN MAX
3, 2 2
To record a source to tape
Not only a source played back on this unit, but also a source
played back on an external unit can be recorded by the tape
deck, VCR, MD recorder, etc. connected with this unit.
1 1
Select the source you want to record by turning the
INPUT SELECTOR.
2 2
Play back the source and then turn the VOLUME control
up to confirm the input source.
3 3
Begin recording on the tape deck or VCR etc. connected
with this unit.
Note
If the built-in graphic equalizer and/or sound field processor
is used, its effect is recorded along with the source when you
make recording on the recording unit connected to the
TAPE MD terminals on the rear of this unit.
However, the effect of the graphic equalizer and/or sound
field processor cannot be recorded when you make recording
on the external recording unit connected to the VCR
terminals on the rear of this unit.
E-30