Turning This Unit On Or Into The Standby Mode; Connections - Yamaha EMX-100RDS Owner's Manual

CONNECTIONS

Connecting external components
8
(See figure on page
This unit can be connected with external audio and video
components. Make connections between this unit and other
components using RCA pin plug connector cables correctly,
that is to say L (left) to L and R (right) to R. Also, refer to the
owner's manual for each component to be connected to this
unit.
SPEAKERS
CENTER/REAR
REAR R CENTER L REAR
MAINS
REAR SINGLE
CENTER :8 MIN./SPEAKER
REAR :4 MIN./SPEAKER
REAR SINGLE :8 MIN./SPEAKER
SEE OWNER'S MANUAL FOR CONNECTION.
AC OUTLET SPEAKERS
FRONT
R L
UNSWITCHED
100W MAX.
6 MIN./SPEAKER
SEE OWNER'S MANUAL FOR CONNECTION.
To AC outlet

TURNING THIS UNIT ON OR INTO THE STANDBY MODE

CD CHANGER RECEIVER EMX–100RDS
1
STANDBY/ON
PHONES
DISC SKIP
CENTER/REAR
TEST
/DELAY
ECHO
LEVEL
SLEEP
8 8
.)
AUDIO SIGNAL
AUX TAPE•MD LD•TV VCR SUBWOOFER
IN OUT IN OUT
VIDEO SIGNAL
L LD•TV VCR MONITOR
OUT
OUT IN OUT
R
AUDIO SIGNAL VIDEO SIGNAL
INPUT SELECTOR VOLUME
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
DISC
2 3
FREQ PS/PTY/RT/CT MODE PTY SEEK START
RANDOM REPEAT TIME MEMORY
PROGRAM
HOUR MIN TIME ADJ
PTY SELECT PRESET/TUNING/BAND A/B/C/D/E
MUSIC
MIC
DISPLAY
USER MEMORY
STOP PLAY/PAUSE
INPUT
FLAT
MUSIC PROGRAM USER
STANDBY/ON
DISPLAY
VOLUME
*
: AC OUTLET (UNSWITCHED)
The power cord of any audio/video unit can be connected to
this outlet.
The power to this outlet is not controlled by this unit's
STANDBY/ON switch . This outlet will supply power to the
connected unit even if this unit is in the standby mode.
The maximum power that can be connected to this outlet is
100 watts
Connecting the AC supply lead
•
After completing all connections, plug the AC supply lead
into a convenient AC outlet.
•
Unplug the AC supply lead from the AC outlet if the unit is
not to be used for a long period of time.
ANTENNA
AM
GND
75
FM
UNBAL.
CENTER
MODE
NORMAL
PHANTOM
If the AC supply lead is connected to the AC outlet, this unit
can be turned on and turned into the standby mode by
pressing the STANDBY/ON switch on the front panel of this
unit or the STANDBY/ON switch on the remote control
transmitter.
AUTO/MAN'L
TIMER
PTY SELECT
Automatic turning this unit into the standby mode
MIC MIXING
This unit will be automatically turned into the standby mode if
MIN MAX
there is no operation on the control parts of this unit, no
illumination on the graphic equalizer level indicators and no
playback of CD for about 30 minutes.
* This function is not available unless time setting is made
on the built-in clock.
STANDBY mode
While the power is on, pressing the STANDBY/ON switch
(or the STANDBY/ON switch on the remote control
transmitter) switches this unit to the standby mode. (In this
mode, the display shows only the time.) In this mode, main
voltage is still present inside the unit. If you want to switch
off this unit completely, disconnect the AC power plug from
the AC outlet.
E-12