Xerox DOCUMATE 252 User Manual page 31

Scanning
26
3. Check the LED number to make sure you're using the scan
setting you want.
To choose a new scan setting, press the Destination Selector
buttons.
The current scan setting. See "Check
the Scan Settings Before Scanning"
on page 27 to check the settings.
Press the Destination Selector to cycle
through the scan settings to select the
one you want.
4. To scan a one-sided document, press the Simplex button.
To scan a two-sided document, press the Duplex button.
A scan progress window opens and the image is sent to the
selected application from the One Touch utility. In this example
of duplex (two-sided) scanning, the Destination Application is
the PaperPort desktop and the two pages are stacked, one on
top of the other.
Cancel Pause
button. button.
To Cancel scanning, click the Cancel button.
To pause the scanning, click the Pause button. It will change to
a Continue button. Put the page back into the scanner and
click Continue to resume scanning.
DocuMate 252 Scanner User's Guide