The Default One Touch Settings On Your Scanner - Xerox DOCUMATE 252 User Manual

The Default One Touch Settings on Your Scanner

DocuMate 252 Scanner User's Guide
When you receive your scanner, its settings are preconfigured to
scan items for various basic tasks, such as email or fax, then send
the scanned image to an appropriate, preselected Destination
Application. The following table shows these factory-default
settings. You can change any of these settings.
Destination
Button Name Application
1 Scan PaperPort
2 PDF PaperPort
3 Print Printer
4 eMail Microsoft
Outlook
(attachment)
5 Fax Fax
Application
6 OCR Microsoft
Word
7 Archive Transfer to
Storage
8 Custom Microsoft
Paint
9 Paint Microsoft
Paint
NOTE: In addition to scanning from the scanner buttons and the
One Touch Button Panel, you can scan directly from PaperPort and
other software applications. See the sections "Scanning with the
TWAIN Interface from PaperPort" on page 85, "Scanning with the
WIA Interface" on page 99 and "Scanning with the ISIS Interface"
on page 104.
Preconfigured Settings
Black&White @ 200dpi Duplex
8.5" x 11" page
Brightness 50%
Black&White @ 300dpi Duplex
8.5" x 11" page
Brightness 50%
Black&White @ 300dpi Simplex
8.5" x 11" page
Brightness 50%
Black&White @ 200dpi Simplex
8.5" x 11" page
Brightness 50%
Black&White @ 200dpi Simplex
8.5" x 11" page
Brightness 50%
Black&White @ 300dpi Duplex
8.5" x 11" page
Brightness 50%
Black&White @ 300dpi Simplex
8.5" x 11" page
Brightness 50%
Color @ 100dpi Simplex
6" x 4" photo size
Brightness 50% Contrast 50%
Color @ 300dpi Simplex
8.5" x 11" page
Brightness 50% Contrast 50%
Scanning
31