Moving And Shipping The Printer; Moving The Printer Within The Office; Preparing The Printer For Shipment; Phaser 7700 Color Printer - Xerox PHASER Phaser 7700 User Manual

Moving and Shipping the Printer

Warning
Follow these guidelines to avoid injuring yourself or
damaging the printer:
Always use at least three people to lift the printer.
I
Always turn off the printer using the power switch on
I
the top-rear of the printer.

Moving the printer within the office

The printer can be safely moved from one location within an office to
another, as long as it travels gently over smooth surfaces. Any jarring
movement, such as pushing the printer over a raised door threshold or
across a parking lot, can damage the printer.
Warning
Damage to the printer caused by improper moving may not
be covered by the printer's warranty.
1.
Close all of the printer's doors and covers.
2.
Turn off the printer using the power switch located on the
top-right of the printer.
3.
Have three people move the printer to the new location. (Use a
cart or dolly that can support a minimum of 250 pounds.)

Preparing the printer for shipment

To transport the printer by vehicle, the printer must be prepared
according to a specific procedure. Special hardware inserts (removed
during the installation procedure) must be installed in the printer so
that it can be shipped safely. Additionally, the printer must be
repackaged in an appropriate shipping carton.
74

Phaser 7700 Color Printer