Offsetting Output - Xerox PHASER Phaser 7700 User Manual

Offsetting Output

You can offset the output in the output tray or the finisher output tray.
Offsetting separates print jobs or collated sets of a single job.
You can switch job offsetting on or off in the front panel:
1. With Menus highlighted, press the OK key.
2. Select the Printer Setup Menu by pressing the Down and Up
Arrow key.
3. Press the OK key.
4. Select the Job Defaults Menu by pressing the Down or Up Arrow
key.
5. Press the OK key.
6. Select Job Offset by pressing the Down or Up Arrow key.
7. Select On or Off by pressing the OK key.
You can select offsetting for collated sets in the printer driver:
1. In the Output Options tab, click the Collate checkbox to select it.
2. Click the Offset Collated Sets checkbox to select it.
Note
When you select stapling, jobs and collated sets will be offset
regardless of the settings in your front panel and driver.
48
Phaser 7700 Color Printer