Paper Tips - Xerox PHASER Phaser 7700 User Manual

Paper Tips

Caution
Do not use paper or transparencies designed for inkjet
printers, especially inkjet coated paper and inkjet
transparencies. Inkjet paper is coated with a substance that
can damage laser printer components. Damage caused by
using unsupported paper may not be covered by the printer's
warranty. Always use Xerox Phaser paper that has been
specially designed for use with your printer.
Use only Phaser 7700 Premium Transparencies. Other
transparencies may cause damage to the fuser. Any damage
that is caused due to the use of unsupported transparency
film may not be covered by your printer's warranty. See
page 32.
For a comprehensive list of paper types, weights, sizes and part
I
numbers, print the Paper Tips Page from the front panel:
Select the Printable Pages Menu by pressing the Down
I
Arrow key.
Press the OK key.
I
Select the Print Paper Tips Page by pressing the Down
I
Arrow or Up Arrow key.
Press the OK key.
I
For best results, use Xerox Phaser paper; it is guaranteed to
I
produce excellent results on your printer.
Auto tray switching is available. If you select Autoselect and one
I
tray runs out of paper, the printer switches to the next tray
containing the same paper size. If you do not have a second tray, a
Load Paper in Tray 1 message displays on the front panel.
While printing, do not remove the paper tray being used for the
I
print job.
User Guide
17