Appendix A: Print The Configuration Sheet; For Phaser Networked Printers - Xerox PHASER 5400 Quick Install Manual

Appendix A: Print the Configuration
Sheet
It is important to print a Configuration Sheet for proper setup of the
printer on the network. The information is used to verify NIC address,
verify enabled printer options, to check printer IP address, to check the
print server name in the case of a Novell network, and to verify the
AppleTalk name or zone if used in an AppleTalk network. The default
settings are suitable for most applications.

For Phaser networked printers

To print the Configuration Sheet from the Printer's Control Panel:
Note
If you change any settings, print another Configuration Sheet
to verify that the changes were made.
1. Press Menu Up or Menu Down until you see:
Menus
Print Menu
Press Item Up or Item Down until you see:
2.
Print Menu
Config Sheet
3. Press Enter. The Configuration Sheet is printed.
4. Review the current settings and make any modifications
necessary for your network application.
Quick Network Install Guide
27