Xerox PHASER 5400 Quick Install Manual page 11

Adding a port
1. To add a TCP/IP port, open the Printer Properties dialog box for
the printer you would like to attach the new TCP/IP port.
Click Start, scroll to Settings, and click Printers.
a.
b.
Click your right-mouse button on the printer to which you
want to attach the new TCP/IP port, and select Properties.
2. Select the Details tab, and click the Add Port button.
3. In the Add Port dialog box, select Other.
4. From the list of available printer port monitors, select the Xerox
TCP/IP Port, and then click the OK button.
5. At this point, you enter the Xerox TCP/IP Printer Port Wizard.
The wizard guides you step-by-step through the process of:
a. Choosing a name for the new port.
b. Identifying a printer by its DNS Name or IP Address.
c.
(Alternatively) Identifying a printer using the automatic
Printer Discovery feature.
Click Next to proceed with the port installation.
6.
The wizard verifies the port name and printer address, and
automatically configures the remaining port settings for you. Any
errors detected in printer identification displays a dialog box
requesting Additional Information.
In the Add Xerox TCP/IP Port window:
a. Under Enter a Port Name, enter a unique name for the port
being added.
b. Under Enter a printer name or IP address, enter the printer's
host name or IP Address.
c. Click Next.
Note
To locate Xerox printers on your local area network, select
Auto Printer Discovery, and then click Refresh. The Xerox
TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select your desired printer from
the list and click OK.
Quick Network Install Guide
5