Xerox PHASER 5400 Quick Install Manual page 18

10. Choose your printer device from the list, then click OK.
11. Click OK. The Wizard returns you to the previous dialog. Verify
that the port name you entered is in the list and is correct. The
check box to the left of the port name must be checked; if it is not,
check it, and then select Next>.
12. Insert your printer's CD-ROM into your computer's CD-ROM
drive and click Have Disk.
13. Click the Browse button and select the directory containing the
Windows NT drivers: <CD Drive>:\instal\winnt40, and then
click Open.
14. Select the *.INF file, then click OK.
15. The Wizard returns you to the previous dialog. Verify that the
path and file name are correct and click OK.
16. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click Next>.
17. If the printer is not shared, click Next>. To share the printer, enter
a Share Name, check the share checkbox, and then click Next>.
18. At the next dialog it is recommended that you print a Test Print.
Click Finish.
19. Wait for the Test Print to print. A new dialog asks for
confirmation of the Test Print; click Yes.
20. Send a print job to the printer.
21. Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
22. If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
12
Xerox Phaser 5400 Laser Printer