Unix Network; Overview; Quick Install Steps - Xerox PHASER 5400 Quick Install Manual

UNIX Network

Overview

Your Phaser printer supports connection to a variety of UNIX
platforms. Below is a list of the currently supported versions:
Solaris


IBM AIX


Hewlett-Packard HP-UX


DEC Unix


True Unix 64 (Compaq)


SCO UnixWare


Linux (i386)


Linux (PPC)


SGI


The procedures contained in this document enable you to connect
your printer in any of these environments.

Quick install steps

1. Print the Configuration Sheet. Details are in this document in
Appendix A: Print the Configuration Sheet.
2. Check the Configuration Sheet and verify that both TCP/IP
protocol and the proper connector are enabled.
Go to Appendix B: Set an IP Address and perform one of the
3.
procedures there, depending on the manner in which you want to
set your printer's IP address.
Quick Network Install Guide
23