Xerox PHASER 5400 Quick Install Manual page 16

2. Run the TCP/IP Port Monitor Setup program located on your
printer's CD-ROM:
Click Start and Run.
a.
b. In the Run window, type: <CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows NT4\<language>\setup.exe.
On the first dialog box, select Install/Upgrade Port Monitor and
3.
click OK.
Port monitor installation
1. The installation process automatically copies the files to the
system directory. When this process has been completed, a dialog
box appears that reads: The Xerox TCP/IP Port Monitor was
successfully installed. To add or remove ports, select the ports
tab in your printer properties.
Click OK.
2.
Adding a port
1. To add a TCP/IP port, open the Printer Properties dialog box for
the printer you would like to attach the new TCP/IP port.
a. Click Start, scroll to Settings, and click Printers.
b. Click your right-mouse button on the printer to which you
want to attach the new TCP/IP port, and select Properties.
2. Select the Ports tab, and click the Add Ports button.
3. From the list of available printer port monitors, select the Xerox
TCP/IP Port, and then click the New Port button.
4. At this point, you enter the Xerox TCP/IP Printer Port Wizard.
The wizard guides you step-by-step through the process of:
a.
Choosing a name for the new port.
b.
Identifying a printer by its DNS Name or IP Address.
c. (Alternatively) Identifying a printer using the automatic
Printer Discovery feature.
Click Next to proceed with the port installation.
5. The wizard verifies the port name and printer address, and
automatically configures the remaining port settings for you. Any
errors detected in printer identification displays a dialog box
requesting Additional Information.
10
Xerox Phaser 5400 Laser Printer