Table of Contents
Advertisement
Communication settings
The following communication setting can be done on the communication setting mode of this
product.
Common settings
Setting item
Protocol
IPv4 settings
Setting items
IP address
Subnet mask
Gateway address
IP Address settings
RARP
IPv6 settings
Setting items
Address resolution
IP address
Prefix
Default router
* Switching of IPv4/IPv6 cannot be done because IPv4/IPv6 dual stack is adopted.
Status3 return
Status4 return (Cycle response mode)
Status4 return (ENQ response mode) (Initial value)
Status5 return
0.0.0.0 to 255.255.255.255
Initial value: 192.168.1.1
0.0.0.0 to 255.255.255.255
Initial value: 255.255.255.0
0.0.0.0 to 255.255.255.255
Initial value: 0.0.0.0
DISABLE (manual setting)
ENABLE
Initial value: DISABLE (manual setting)
RARP Disable
RARP Enable
Initial value: Disabled
MANUAL/DHCP/AUTOMATIC
Initial value: AUTOMATIC
0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
Initial value: 0000:0000:0000:0000:0000:0000:0000:0000
0 to 128
Initial value: 64
0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
Initial value: 0000:0000:0000:0000:0000:0000:0000:0000
Setting range
Setting range
Setting range
492
Advertisement
Table of Contents
