Function Setting
It is required to configure each interface in the interface mode of this product before using it.
Procedure to Go to the Interface Mode
It is necessary to go to the interface mode to configure each interface.
1. Power on this product, press LINE once while this product is ONLINE.
ONLIN E
This product goes OFFLINE.
2. Press ENTER.
OFFLINE
This product goes to MODE MENU.
3. Press → twice to move the the cursor to
ONLIN E MODE
4. Press ENTER.
INTER FACE MODE
This product goes to the interface mode.
Turn off this product after changing the settings, then turn on again.
QTY:000000
QTY:000000
.
404